Skip to main content

NEW Flashbreaker® 1R Pre-Cut Tape Strips

Flashbreaker® 1R is now available in 1” x 2” (2.54 cm x 5.08 cm) Pre-Cut Tape Strips for customers who want to reduce touch labor and minimize the use of knives and scissors to avoid risk of hand injury. In addition, it eliminates the possibility of damaging the vacuum bag. There’s 2,500 cut strips per roll.

NEW Pre-Cut Tape Strips

We are now able to offer additional tapes in Pre-Cut format to customers who want to reduce touch labor and minimize the use of knives and scissors to avoid risk of hand injury. In addition, it eliminates the possibility of damaging the vacuum bag.

NEW Carbon Triaxial Fabrics

Airtech TMGC-TX Fabrics are Triaxial Carbon Fabrics developed for the manufacture of composite molds with Airtech Toolfusion® resins.

NEW A4000 LFST Heat Shrinkable Release Film Tube

A4000 LFST is a heat shrinkable lay-flat tube which has been oriented in the transverse direction. When exposed to heat 249 to 348°F (121 to 176°C) in a recirculating oven, tunnel oven or from a heat gun, the A4000 LFST material will shrink to closely fit the mandrel.

NEW Airtac 3 Spray Adhesive and Air Trigger

Airtac 3 is a new, safer spray adhesive designed for temporary bonding. Airtac 3 can be used to hold dry materials on contours and vertical surfaces. This product is ideally suited to resin infusion applications for holding reinforcement plies, release films, peel plies, and infusion mesh in place until the vacuum bag is secured. Airtac 3 has a fine pebble spray pattern which reduces airborne material. This reduces overspray and user exposure. Air trigger is sold separately.

NEW Combo-Tech

Combo-Tech is our expanded product line that bonds various vacuum bagging materials together to form a better overall product and reduce “touch labor”, saving companies hours of labor expense while increasing productivity.

Filmcote® 1524

Filmcote® 1524 is an engineered film developed as a replacement for release liquids on the surface of mold tools. Filmcote® 1524 remains on the part surface after demold providing protection from damage or contamination during subsequent process.

Beta TX 670 DISCO Prepreg

Beta TX670 DISCO is a prepreg sold in sheet format. This special format allows for simpler and faster layups. Beta TX670 DISCO Prepreg has a 0°,+/-60° orientation, is quasi-isotropic within each ply, and comes with an engineered cut pattern that improves drapability.