The Heat-Tech® Z-1 is a single-zone easy-to-use mobile heating element system. Consisting of a small powerful resistive heating control unit and a flexible silicone heating blanket with integrated temperature sensors.
Airtac 2 Improved is a mist spray rubber adhesive designed for temporary bonds. Airtac 2 Improved can be used on materials needing extra tack for placement on vertical or difficult surface areas. This product is ideally suited for tool shop applications such as temporary placement of details and pattern fabrication. Airtac 2 Improved meets many of the low VOC state restrictions for aerosol products.
Wrightlease 4 is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. The orange color is highly visible on most substrates in addition to offering high elongation and tensile strength.
OOA Beta Prepreg is a new benzoxazine formulation that allows autoclave and out of autoclave (OOA) processing. OOA Beta Prepreg offers long term storage at room temperature. OOA Beta Prepreg has low resin shrinkage during cure and has a high glass transition temperature.
Vac Saver HT is a one way valve usable to protect vacuum bagged parts against vacuum loss which are multiple connected to a vacuum source. In case of a vacuum loss in a part which is connected to the same vacuum source, the Vac Saver HT closes automatically and protects this part against vacuum loss.
Corehold P-HA is a core holding film designed to hold honeycomb core and other core materials during machining. It is a polyester film coated on one side with a silicone free synthetic rubber adhesive. The film is supplied with a yellow backing release paper on one side.
Stretch Flow P 2000 is a knitted, polyester breather with excellent stretch properties. The high-stretch characteristics of Stretch Flow P 2000 enable it to conform to many complex contour surfaces, ensuring good application of pressure by vacuum bags.
Vac Valve 429 SS HTR was designed for high temperature cures where standard valves with silicone rubber seals fail. Vac Valve 429 SS HTR is to be used for direct connection to vacuum hoses instead of complex and expensive coupling systems.
New generation sealant tape for high temperature applications. Fast Tack HT builds tack quickly when applied to Thermalimide. Having good room temperature adhesion to the high temp bagging film reduces the time required to vacuum bag high temperature parts.
Airweave® UHT 300PGL and Airweave® UHT 450PGL are premium non-woven blended, fiberglass breather for ultra high temperature applications. It is safer to use these breathers in place of woven fiberglass breathers.